odd click when ridding

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • crapwacker
    • Feb 2026

    #1

    odd click when ridding

    I haven't been able to isolate this sound, and it isn't consistent. Seems to be coming from the right side. Usually in lower RPMs. It just started, and won't happen unless I'm ridding.
  • Nessism
    Forum LongTimer
    GSResource Superstar
    Past Site Supporter
    Super Site Supporter
    • Mar 2006
    • 35790
    • Torrance, CA

    #2
    Starter clutches on the way out are known to make noise but that's on the left side. Right side noises...not sure. The clutch hub nuts are known to come loose occasionally so it could be relalated that maybe.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    • IT-simon

      #3
      make a video of it, try to capture the noise from different angles to pinpoint where it's coming from. is it a fast noise? does it go faster with higher rpms, or is it about the same? there are a lot of videos on the internet for noises, maybe one of them match what you're having in case you can't upload one.

      Comment

      • sparki

        #4
        Originally posted by IT-simon
        there are a lot of videos on the internet for noises, maybe one of them match what you're having in case you can't upload one.
        i couldn't start to imagine how much fun it would be trying to implement that suggestion....

        Comment

        • IT-simon

          #5
          lol, yeah, i got to see a lot of other bikes, it's a nice trip if you have the time..

          Comment

          • eaglerugby04

            #6
            I am having a similar sound coming from my 1100gk. It sounds like a clank-clank-clank until I hit 3k or so. The noise sounds like it should not be coming from a bike and kind of reminds me of something you would hear out of a diesel type truck almost.

            I am guessing it is something to do with the clutch, any ideas what to look for?

            Comment

            • GregT
              Forum Sage
              • Jul 2009
              • 3541
              • New Zealand

              #7
              Usually if there's a clutch problem you'll have trouble like slipping or not disengaging.
              It is possible you may have a broken fiber plate -but if the clutch nut is loose but not totally off it can sound like that.
              The ballrace on the right hand end of the crank takes the side thrust from the primary gears - if it has a pitted race it makes very odd noises.
              Had an 1100 down 3 times before tracking that one down...

              Comment

              • crapwacker

                #8
                Originally posted by Nessism
                Starter clutches on the way out are known to make noise but that's on the left side. Right side noises...not sure. The clutch hub nuts are known to come loose occasionally so it could be relalated that maybe.
                Correction, it is on the left side. How would I set forth on diagnosing it as the starter clutch?

                Comment

                • Dogma
                  Forum Guru
                  • Sep 2007
                  • 7143
                  • Mason, OH (SW)

                  #9
                  Originally posted by eaglerugby04
                  I am having a similar sound coming from my 1100gk. It sounds like a clank-clank-clank until I hit 3k or so. The noise sounds like it should not be coming from a bike and kind of reminds me of something you would hear out of a diesel type truck almost.

                  I am guessing it is something to do with the clutch, any ideas what to look for?
                  Preignition? Don't use so much throttle below 3k.
                  Dogma
                  --
                  O LORD, be gracious to me; heal me, for I have sinned against you! - David

                  Skeptical scrutiny is the means, in both science and religion, by which deep insights can be winnowed from deep nonsense. - Carl Sagan

                  --
                  '80 GS850 GLT
                  '80 GS1000 GT
                  '01 ZRX1200R

                  How to get a "What's New" feed without the Vortex, and without permanently quitting the Vortex

                  Comment

                  • Nessism
                    Forum LongTimer
                    GSResource Superstar
                    Past Site Supporter
                    Super Site Supporter
                    • Mar 2006
                    • 35790
                    • Torrance, CA

                    #10
                    Originally posted by crapwacker
                    Correction, it is on the left side. How would I set forth on diagnosing it as the starter clutch?
                    I'm not sure how to test the clutch. Only thing I can suggest is removing the rotor and clutch and checking everything out visually.
                    Ed

                    To measure is to know.

                    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                    Comment

                    Working...