Announcement

Collapse
No announcement yet.

Will a 83 GS1100g swingarm fit on a 80 GS1000g frame

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Will a 83 GS1100g swingarm fit on a 80 GS1000g frame

    I am putting an 1100g motor into a gs1000g frame and would like to use the swingarm and rear wheel brakes etc off the 1100g as well.
    It seems the 1100g swingarm should fit although it is 5mm narrower in measurement at the pivot bearing end to bearing end.
    Does that matter or can the difference be taken up by tightening the bearings.

    Would appreciate some expert advice.
    Thanks

    #2
    With enough ingenuity any thing can be made to work.

    Comment

    Working...
    X