Bike rolls idling with clutch in.

[fastpakr]

Change the oil and see how it behaves. If it's still giving you problems, replace the clutch friction pieces (and springs if necessary).

[BadBillyB]

Blowerbike is exactly right on this one. The Barnett clutch plates are crap....OEM Suzuki plates are the real deal......Put the steels in with the smooth side (they are stamped) out. And dont soak them overnight in oil, just wipe a little on them as you install them.......I should have used caps on the word crap......Billy

[pwrdbyoreos]

Alrighty. sounds like a plan to me. and I will take it from here. And, even working "well" I would agree that the barnett clutch was junk.