1150 rear wheel swap

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #1

    1150 rear wheel swap

    I have swapped out the rear wheel on my 80 1100ET with an 1150. and have a question for someone else that has done it. I put a few spacers on the calipers and they line up nicely with the rotor, but I am not sure of the best spot to put spacers on the axle. I know there should be some, as the large nut turns in WAY to far. How thick does the spacer need to be?
    Some help/guidance here would sure be appreciated.


    Thanks!
Working...