Replaced clutch plates & cable

[MR -K]

hey out there, I was just wondering why my clutch on my gs700 is still slipping at high R.P.M. I have replaced the friction plates,clutch cable and have done all the proper adjustments. Any help would be appreciated.

[kdo58]

springs? enough slack in the cable?

[blowerbike]

worm gear adjustment man...worm gear adjustment.

[MR -K]

Oops forgot the springs, just ordered them. Blowerbike, what is the proper setting for the worm gear, I guess It it too far in right now.

[blowerbike]

Oops forgot the springs, just ordered them. Blowerbike, what is the proper setting for the worm gear, I guess It it too far in right now.

loosen nut.
run screw in until it lightly touches.
back out 1/2-1 turn.
jam nut down without disturbing the screw.
do this and check for slippage as you may not need springs.

[MR -K]

Thanks, the worm drive screw was in too far. no more slippage,just lots of top end power.