GS1100e and GS1150e cam events

[jacora]

Do somebody know where I can find the cam events for GS1100e and GS1150e bikes?
for example in a Harley Cam;
intake valve open 18?BTDC, close 40?ABDC;
Exhaust valve open 42?BBDC, close 17? ATDC

[Nessism]

The info is in the factory service manual, which you can download for free from basscliff's web site.

[jacora]

Ed;
Please help find out the information, I did not found it on the service manual.

[Nessism]

You can download the factory 1100 manual here...http://members.dslextreme.com/users/bikecliff/

Info is in the Engine section.

Unfortunately, Cliff doesn't have an 1150 manual that I could see. Not sure where you can get that info other than maybe searching the archives here or waiting for someone with a factory manual to chime in.

[Steve]

Here is the info from the 1100 manual: (page 73 of Basscliff's pdf file)



.

[TeamDar]

GS1150 cam specs. Intake opens 34 degrees BTDC, closes 66 degrees ABDC. Exhaust opens 60 degrees BBDC, closes 32 degrees ATDC. Taken from the factory manual. The 1150 cams have more lift, I believe 1mm than the 1100.

[jacora]

thanks very much for these useful information

[jacora]

Ooopsss; this timing chart is for GS1100G not for GS1100E. GS1100G is 8 valves rather than 16 valves like GS1100E 81-83.

I found it, thanks any way.

Inlet opens @30? BTDC, closes @ 70?ABDC
Exhaust opens @ 63? BBDC, closes @ 25? ATDC

Thanks always for your advice.

Here is the info from the 1100 manual: (page 73 of Basscliff's pdf file)



.

[jacora]

GS1150 cam specs. Intake opens 34 degrees BTDC, closes 66 degrees ABDC. Exhaust opens 60 degrees BBDC, closes 32 degrees ATDC. Taken from the factory manual. The 1150 cams have more lift, I believe 1mm than the 1100.

Which is the cam journal O.D. of GS1150 cams?
Does any body installed GS1150 intake cam + GS1100 exhaust cam?
How it works? How it feels? Its noticeable the increase in power?

[Steve]

Ooopsss; this timing chart is for GS1100G not for GS1100E.

Sorry about that, you are quite correct.

Here is the correct diagram.

It's on page 103 of the 1100E manual.



.

[Guest]

Does any body installed GS1150 intake cam + GS1100 exhaust cam?
How it works? How it feels? Its noticeable the increase in power?

Anyone done this? Sounds interesting.

How does the 1100 head respond to the usual bowl and throat cleanup/porting?

[posplayr]

use search function

http://www.thegsresources.com/_forum/showthread.php?t=137631&highlight=low+cost+head

http://www.thegsresources.com/_forum/showthread.php?t=158221&highlight=cam+lift

http://www.thegsresources.com/_forum/showthread.php?t=158111&highlight=cam+lift

http://www.thegsresources.com/_forum/showthread.php?t=140749&highlight=valve

Headwork is fertile ground for HP


I just put a set of stock GS1100EZ cams into a stock GS750EX (same exhaust but more lift on intake). I had to increase the main jet size from 112.5 to 116 (approx) and it provided a noticeable wakeup above 3K RPM.