Gear ratio

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Riklib

    #1

    Gear ratio

    Woo Hoo!

    Just got back from a test ride of the replacement motor. I really miss that sound.

    Is the gear ratio of the secondary drive or rear tire size different on the 1981 GS850G than on the 1980 GS850 L? It seems to be reving higher at 60 mph. I cant tell you the rpms as my tach cable is broken.

    All my Harley freinds ask me how fast it goes. I tell them 85 mph cause thats as high as ht speedo goes.LOL!!
  • Nessism
    Forum LongTimer
    GSResource Superstar
    Past Site Supporter
    Super Site Supporter
    • Mar 2006
    • 35808
    • Torrance, CA

    #2
    EDIT: posted the old version of the table. Deleted from this post and reposted new (below).
    Last edited by Nessism; 02-21-2012, 05:46 PM.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    • Dogma
      Forum Guru
      • Sep 2007
      • 7144
      • Mason, OH (SW)

      #3
      Ed,

      Where did that data come from? My 850GLT has a 17" rear, and others here have reported the same. I don't remember if the RPM at 70 are correct, and I wouldn't trust the speedo and tach for a 200 RPM difference anyway.

      Riklib,

      The exhaust sound is different between G and GL models. Could this be what you interpret as sounding like higher revs?
      Dogma
      --
      O LORD, be gracious to me; heal me, for I have sinned against you! - David

      Skeptical scrutiny is the means, in both science and religion, by which deep insights can be winnowed from deep nonsense. - Carl Sagan

      --
      '80 GS850 GLT
      '80 GS1000 GT
      '01 ZRX1200R

      How to get a "What's New" feed without the Vortex, and without permanently quitting the Vortex

      Comment

      • Riklib

        #4
        Thanks for the data mine has a 17" rear also. I dont think its the exhaust I used the 1980 GS850L exhaust from my bike. I just put the$100.00 1981 GS850G motor in. I just sounds like its reving higher at 60 MPH. Maybe I just got used to riding my wife's Harley 1200 custom lugger. LOL. Just didn't know if the tire size or second drive was different.

        Comment

        • Nessism
          Forum LongTimer
          GSResource Superstar
          Past Site Supporter
          Super Site Supporter
          • Mar 2006
          • 35808
          • Torrance, CA

          #5
          Originally posted by Dogma
          Ed,

          Where did that data come from? My 850GLT has a 17" rear, and others here have reported the same. I don't remember if the RPM at 70 are correct, and I wouldn't trust the speedo and tach for a 200 RPM difference anyway.

          Riklib,

          The exhaust sound is different between G and GL models. Could this be what you interpret as sounding like higher revs?
          Sorry, posted the old version of the chart. I have a new version but can't access photobucket from work. I'll update later tonight...
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment

          • Nessism
            Forum LongTimer
            GSResource Superstar
            Past Site Supporter
            Super Site Supporter
            • Mar 2006
            • 35808
            • Torrance, CA

            #6
            Originally posted by Dogma
            Ed,

            Where did that data come from? My 850GLT has a 17" rear, and others here have reported the same. I don't remember if the RPM at 70 are correct, and I wouldn't trust the speedo and tach for a 200 RPM difference anyway.

            Riklib,

            The exhaust sound is different between G and GL models. Could this be what you interpret as sounding like higher revs?
            Sorry, posted the old version of the chart. Here is the updated version...

            Ed

            To measure is to know.

            Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

            Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

            Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

            KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

            Comment

            • Riklib

              #7
              Ok ? I think? Now I'm confused. itsays 79-82 has a 0.961 5th gear ratio with 17 in. tire.
              Then it says 81-82 has a0.923 5th gear ratio with a 16 inch tire.
              So I guess I should be asking how do you tell the differnce between a GLT, GLX or GLZ

              My Bike is an 80 L I think the motor came out of an 81 G .

              So I have (or had) a 17 in tire with a 0.961 5th gear ratio
              The 1 I got may have the 0.923 5th gear ratio that ran a 16 in tire

              So now I got a 17 inch tire with a 0.923 5th gear raio. This would make it rev higher in 5th gear?

              Comment

              • Nessism
                Forum LongTimer
                GSResource Superstar
                Past Site Supporter
                Super Site Supporter
                • Mar 2006
                • 35808
                • Torrance, CA

                #8
                .923 has a higher overdrive than .961, so lower revs, not higher.
                Ed

                To measure is to know.

                Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                Comment

                Working...