RHS of engine, what is this for?

[Greenbraes]

I know this may sound daft but what is this bolt head/plug for marked up in photo?(the fiche is not to good in this area) Can I remove/replace it for cleaning/polishing before I soda blast the engine.



Cheers

RB

[kdo58]

http://www.google.com/imgres?um=1&hl=en&sa=N&biw=1280&bih=601&tbm=isch&tbnid=vKYChP-tqVfp2M:&imgrefurl=http://forum.oldskoolsuzuki.info/cgi-bin/Yabb/YaBB.pl%3Fnum%3D1276450941/3&docid=UFUCRCQDlNvjyM&itg=1&imgurl=http://forum.oldskoolsuzuki.info/yabb/Attachments/IMAG0102.JPG&w=640&h=480&ei=vH-MT9PCDejWiALwgLmlCw&zoom=1&iact=rc&dur=860&sig=103081633092370697012&page=1&tbnh=145&tbnw=199&start=0&ndsp=10&ved=1t:429,r:3,s:0,i:82&tx=69&ty=61

[hampshirehog]

That's the oil gallery plug and it's job is just that - to plug the oil gallery (??). You can pull it off if you want but make sure you plug the hole well when you're blasting as that's a direct entry in to your oil system.

[Guest]

Put an oil pressure guage in there. It's fuctional coolness!

[Greenbraes]

That's the oil gallery plug and it's job is just that - to plug the oil gallery (??). You can pull it off if you want but make sure you plug the hole well when you're blasting as that's a direct entry in to your oil system.

I was planning on removing it and cleaning it up and replacing it before I soda blast....soda only gets so much off and the plug appears to be pretty rusty
Thanks for the info, I can now remove it without worrying something might fly out after it...lol

RB