I am trying to put the valve buckets back on and I cant seem to get the on. One I got half way on and it is stuck I cant get it on and I cant get it back off any suggestions?
-
-
Sounds like the parts are either dirty or damaged (scored/warped). The bucket will bind in the bore if it's tilted so you might want to make sure it's going in axially, and the buck/bore is properly cleaned.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
How can I get it out if it is stuck?Comment
-
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
thanks I taped with a rubber hammer and it came outComment
Comment