Announcement

Collapse
No announcement yet.

Clutch cable adjustment help...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Clutch cable adjustment help...

    I purchased a new clutch cable from Motion Pro recently. It's a shorter cable to fit clubmans, but I can't seem to get it adjusted correctly. I've followed the directions in the manual, but there seems to be almost no resistance when pulling the clutch - only the spring on the cable itself. I've loosened the adjustment at the lever, attempted to adjust in the cover, and then tightened at the lever again, but still no resistance. When I start the bike on the center stand in neutral, then shift into first the rear wheel spins with the clutch engaged... any ideas?

    Thanks

    #2
    I bit more tinkering with the "resistance" adjustment and I got it!

    Comment


      #3
      What bike is it? Did u figure it out?

      Comment


        #4
        I did figure it out, thanks. Its a '77 gs750.

        Comment

        Working...
        X