New half moons Using silicone cam cvr gasket.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • LarryJ

    #16
    Installed OEM style paper gasket. No leaks now!

    Comment

    • sparki

      #17
      Originally posted by LarryJ
      Installed OEM style paper gasket. No leaks now!
      exactly.... oem camcover gaskets are the way to go imo...

      Comment

      • tkent02
        Forum LongTimer
        Past Site Supporter
        • Jan 2006
        • 35571
        • Near South Park

        #18
        Originally posted by ronv992
        I replaced gasket on my bike. Used factory gasket with high temp silicone permatex. Put thin bead all over and under the half moons left in factory position. I tightened down snug not concerned with torque. I then let it sit for a little more than 24 hours. Started up, no leaks.
        Good luck getting the loose strings of that silicone sealer out of all of the internal oil passages after the engine seizes up.
        http://img.photobucket.com/albums/v5...tatesMap-1.jpg

        Life is too short to ride an L.

        Comment

        Working...