GS1100 will not go into gear

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • olilem

    #16
    I know no more about what happened than what he told me. Ill check out the clutch and all later this week.
    Blowerbike, ill pm you once I know what the problem is, and hopefully we can get the bike sorted out.

    Comment

    • almarconi

      #17
      trans just don't break like that
      I'm working on one now that had a piece of broken shift fork in the oil pan. The PO said he was just riding along, heard a pop when he shifted into third, rear wheel locked up..yada yada yada.

      Comment

      • koolaid_kid

        #18
        That is why I said "usually". Nothing is impossible, although some things are improbable.

        Comment

        • SqDancerLynn1

          #19
          On a shaft drive the first thing to check is the secondary gear set. Check the big nut that connects the drive shaft to the engine- inside the Boot on the swing arm the stem sometimes breaks

          Comment

          • koolaid_kid

            #20
            Originally posted by SqDancerLynn1
            On a shaft drive the first thing to check is the secondary gear set. Check the big nut that connects the drive shaft to the engine- inside the Boot on the swing arm the stem sometimes breaks
            Thank you. That is what I was calling the transfer case, I just did not know the formal name for it.

            Comment

            Working...