will this fit my bike?

[gs750caferacer]

i have a 1980 gs750LT with the tscc 16 valve motor.. square cam covers?

http://www.ebay.com/itm/130787104052?item=130787104052&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

cheers. im trying to find a cheap gasket set so i can bolt the cases back together and ride for now!

[Biggie]

it looks like the right gaskets to me, i have the same engine and bought an original set of those.

[Guest]

It looks right but not recommended around here we recommend OEM gaskets , if you want to only do the job once, as it seems alot of the aftermarket stuff isn't as good and don't seem to last

[Guest]

Buy OEM gaskets. I recently bought a clutch cover gasket off ebay (cheaper the OEM) and now I have a leak. I took the new gasket off and compared it with the old OEM. The new ebay gasket was thinner and wouldn't seal at the bottom. The ebay gasket was cut from a different type of material by a computerized cutter. I think they used too thin of a gasket material. I now have two OEM gaskets coming, one is for a spare.

[gs750caferacer]

being over here in the south pacific its really hard to get OEM stuff can someone tell me where is a good place i can get the right gaskets for a good price as the shipping has doubled my build cost and on a few parts tripled it! Also if anyone knows of a place that does a jet kit too... I cut the pipes and im going to be running velocity stacks... I would like to get the engine stuff all at once preferably from the same place to save on shipping!!! All the help will be greatly appreciated Thanks

[gs750caferacer]

it looks like the right gaskets to me, i have the same engine and bought an original set of those.

how did they work for you??? where did you get them?

[GateKeeper]

Try BoulevardSuzuki - http://www.boulevardsuzuki.com/default.asp

or Z1Enterprises - http://www.z1enterprises.com/Home.aspx

and yes your right, shipping out to you is a killer.....

.