oil cooler....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RigRoller

    #1

    oil cooler....

    So i just found out the oil cooler is not oem on my 82 mz.....so how much extra oil should i put in it....ya noob question...lol... rite now im at like 2 3/4 quarts lucas 10/40....should u i add like a another 1/2 qrt ???so the oil sight glass is like 3/4 full im between f and L....
    thanx james
  • Nessism
    Forum LongTimer
    GSResource Superstar
    Past Site Supporter
    Super Site Supporter
    • Mar 2006
    • 35790
    • Torrance, CA

    #2
    You need a whole lot more oil than 2 3/4 quarts. Check your service manual for the oil level, then add another 1/3 of a quart or so for the cooler.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    • Guest

      #3
      Make sure it is always at the top of the site window at minimum.

      Comment

      • GS1100ez

        #4
        when i added my cooler
        i started it up
        let it prime the cooler
        added oil to the middle of the sight glass
        started it up
        let it run a few min
        checked it
        added if needed to sight wglass

        drove it a few miles to really get it pumping and all the air out
        and checked it again and adjusted accordingly

        when its cold the sight will be filled due to the cooler draining down

        Comment

        Working...