Does anyone know if the 2v 750 and 850 use different cams? If so, which one is hotter? I know the 750 cams are slightly hotter than the 1000, but not sure on the 850.
-
-
Year for year, they have the same specs.
In 1980, though the opening of the intake cam on the 850 was changed 10 degrees
Might have been to enhance the performance of the new CV-type carbs.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
ok. thanks! looking at putting the 850 jugs on my 750 so while i had it apart i wanted to put the hottest cams in. I hate having to go back and do something over when i didn't do my research before i started. Thanks again!Comment
-
At least it's not very hard to change the cams.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
Comment