Hi everybody, I need opinions on something. When I first got my 850 running, the clutch work fine. I changed the oil and filter, then the clutch is dragging only when cold. I found out from the PO that he used full synthetic oil in it. I am using dino oil. If I remove the clutch plates and cleaned them, do you all think that would help?? Thanks, Mark
-
-
I run full synthetic 5w40 in mine and get no dragging even in the coldest weather. A dino 15w40 could cause some drag at colder temperatures but I doubt it is that cold where you live. Your best bet is a synthetic or dino diesel oil. Don't use anything that is marked " energy conserving".
What weight oil are you using? -
How much clutch free play at the lever? If you have a lot, tighten the clutch cable. If that doesn't work, the clutch plates may be warped.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
Comment