Fits a gs 1000 into a gs 550 1978

[dudacheck]

Hello people,

Is there someone who knows if a GS 1000 motor fits into a GS 550 frame 1978 ?
or maybe a GS 750 ?

http://www.marktplaats.nl/a/motoren/motoren-suzuki/m679659088-suzuki-gs-550-bobber-caferacer.html?c=d721e818194200feca4409741512b6e6&previousPage=mympSeller

[5150/gs]

not naturally no, cuts n welds and unsafe for sure, that's my 2 cents and I am centsless, more may chime in, motor mounts, clearance issues u name it.
Frame is too small

[Guest]

I would try a Bandit 1200 or GSXR1100 motor it is smaller in size and get ready for some frame flexing

[tkent02]

[QUOTE=dudacheck;1870065]Hello people,

Is there someone who knows if a GS 1000 motor fits into a GS 550 frame 1978 ?
or maybe a GS 750 ?



The 1000 motor pops right into the 750 frame.

[78gs750e]

Two motor mounts are different, the top back and the bottom. You must use the front 750 motor plates, and make the other plates.

[tkent02]

The front mounts need to be made up too, but it's all fairly easy.