Hello everyone, can you change the secondary drive gears on an 850 with the engine in the frame, or do I need to pull the engine?? Thanks, Mark
-
-
Hey Mark,
Welcome to the short bus. Yes you can, you well need to release the tension on the case bolts in that area around the outside of the case from the ground attach point in th rear to just behind the starter. No need to take them completely out, just to the point where there loose.
When you go back together don't forget to use new o rings and seals, OEM is best.
Bascliff will be along soon with your "Mega Welcome". He has all the info you will probably need to keep your classic ride on the street and a smile on your face.
Cheers
Comment