ID Suzuki part number for me

[littleroot]

Hello folks,

I am replacing the stator-side crankcase cover and I'm pretty sure there is supposed to be a locating pin where the red arrow is pointing in the photo.
Well, dummy me I ordered pin #3 and it roughly half the size. I think I should have orders #18, as shown in the fiche screen shot. Can someone confirm?

Thanks!
-Bob

[/URL]


[/URL]

[ozman]

nope nothing missing no dowl there its the end of the oil gallery running across rear of cylinders

ozman

[blowerbike]

the locating pin for the rear of the cover is the idler gear shaft

[Brendan W]

There is no hole in the gasket for that pin at the two o'clock position.

[littleroot]

Ah, well, that explains why it is not on the fiche!

This is great news as I don't have to wait on more parts!

Thank you all.

[blowerbike]

There is no hole in the gasket for that pin at the two o'clock position.

the idler pin??
of course there is no gasket there...
it's a support pin that rides in the engine case and stator cover.

[ozman]

the idler pin??
of course there is no gasket there...
it's a support pin that rides in the engine case and stator cover.

wrong hole blower !!!! hes talking about the 1 above the idler gear, the end of oil gallery thats sealed by the gasket

ozman

[blowerbike]

wrong hole blower !!!! hes talking about the 1 above the idler gear, the end of oil gallery thats sealed by the gasket

ozman

hmmmm
it's 2:00 some where....
no hole needed...just seals the oil pressure/flow.
which is what he was saying but it is obvious