No slack in clutch.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Frog

    #1

    No slack in clutch.

    This may be a basic question, but I have an '83 GS750ES and their is absolutely no slack in the clutch cable. I've tried adjusting it with the jam nuts, but it doesn't seem to do anything. There is also a good amount of slippage at higher RPM's so I'm led to believe that I'm adjusting the cable wrong or that my clutch plates need to be replaced. I assume that I need to drain the oil and take off the clutch cover to check the plates?

    Also, if it turns out that the clutch cable is just stretched, how would one go about replacing it?

    Thanks in advance for any help.
  • Nessism
    Forum LongTimer
    GSResource Superstar
    Past Site Supporter
    Super Site Supporter
    • Mar 2006
    • 35783
    • Torrance, CA

    #2
    Time to crack open the service manual and adjust the clutch properly. Turn in all the cable nuts and adjust the clutch at the helix (or as Terry loves to say, the worm gear). This of course assumes the cable is serviceable.

    Good luck
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    • Agemax
      Forum Guru
      • Apr 2008
      • 8371
      • plymouth uk

      #3
      if the cable is stretched, you will have too much freeplay. are you adjusting it correctly? screw the adjuster in towards the lever on the bars and unscrew the jam nut on the cable so you can wind the adjuster in, giving you more free play
      1978 GS1085.

      Just remember, an opinion without 3.14 is just an onion!

      Comment

      • blowerbike
        Forum Guru
        GSResource Superstar
        • Aug 2008
        • 7057
        • Ohio Closer to KY Than Cleveland

        #4
        worm gear!

        Comment

        Working...