Engine cover clarification

[Guest]

Hey all. I sold a stator cover to a forum member that needed one for his 82' 1100GL. I sent him one from a GS1000 but it does not fit. Here's his reply.

"when I went to install it today I discovered that it is just slightly smaller then I need. The bolts line up just like the old one. What doesn't fit is the diameter of the protrusion that goes around the magnet"

Can someone clarify for me the stator cover that will fit, thought for sure the 1000 would.

[BigD_83]

This should help you out:

http://find.partzilla.com/?r=t&s=1&q=11351-49002&x=-586&y=-10

[BigD_83]

btw, I know I had a heckuva time putting my replacement stator cover back on the bike. It has to line up exactly. I bet that is all that is happening

[Agemax]

according to alphasports cross reference only a GS1000G cover is the same as an 1100G, if this is any help to you.......

1980 SUZUKI GS1000GLT - CRANKCASE COVER
1981 SUZUKI GS1000GLX - CRANKCASE COVER
1982 GS1100G - CRANKCASE COVER
1982 SUZUKI GS1100GKZ (Touring) - CRANKCASE COVER
1982 SUZUKI GS1100GLZ - CRANKCASE COVER
1983 SUZUKI GS1100GD - CRANKCASE COVER
1983 SUZUKI GS1100GKD - CRANKCASE COVER
1983 SUZUKI GS1100GLD - CRANKCASE COVER
1984 SUZUKI GS1100GKE Touring - CRANKCASE COVER

[Guest]

Ya that's what I was worried about. I sent him one from an older 1000 I guess. My bad

[BigD_83]

Do you know the year/model of the one you sent down? The Partzilla cross reference does show the 80-81 1000E/G/S covers all fit the '82 1100GL

[Guest]

It would have been from a 78' 1000. It doesn't look like I have one that will fit.

[Guest]

Hey Derek, just so you know when I click on your link for the 'fuelly' thing, it won't let me see what you're trying to share, it tells me to log in. Just sayin'

[BigD_83]

Hey Derek, just so you know when I click on your link for the 'fuelly' thing, it won't let me see what you're trying to share, it tells me to log in. Just sayin'

I'll look into that. Thanks. It's a handy little tool.

EDIT- it appears there is no way to share the data in an open forum, but the data is fully public for other members of Fuelly. I can, however share the data on Facebook, but I choose not to.