Announcement

Collapse
No announcement yet.

82 gs650gl oil system

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    82 gs650gl oil system

    I'm about to seal up the bottom end on my rebuild and I'm a little lost on the center Oil jet and washer I don't remember the exact order they went it could some one help me and also which way the oil jet faces.
    o this way small end facing towards the top of the engine?

    Then the washer with the rubber side facing towards the bottom of the case?

    Thanks.

    #2
    Bump anyone?

    Comment


      #3
      You might want to look though the archives for guys that have rebuilt shaft drive 650 engines and drop them a PM. Some guys with the knowledge may not see this thread.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment


        #4
        Try PM ing member "overboostin" in RI - he might have answer on 650 shafty crankcase
        Last edited by tom203; 11-04-2013, 08:40 AM. Reason: memory failure
        1981 gs650L

        "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

        Comment

        Working...
        X