520 swap

[Guest]

Has any swapped a 520 chain on a 78 750

[Kyler]

my original motor was a '77 but it also works on a '80.

I run a JT Sprockets JTF512 front sprocket with a 6mm Front Sprocket Spacer Washer.

I have a completely custom rear hub so can't comment on that.

[rwnielsen]

http://www.z1enterprises.com/ShopByCategory.aspx?name=630+to+530+chain+conversion&description=Information%2c+front+%26+rear+sprockets%2c+spacers+and+c&category=0101040504010901

These guys are really helpful

[Gsgsxr]

my original motor was a '77 but it also works on a '80.

I run a JT Sprockets JTF512 front sprocket with a 6mm Front Sprocket Spacer Washer.

I have a completely custom rear hub so can't comment on that.

What gearing are you running?

[Kyler]

it depends on the track and the weight of my passenger. Tight short tracks I run a 16T front and anywhere from a 40-42 rear. Long tracks I run 15/46.

keep in mind I have a 13" x 8" racing slick on the rear.

[Gsgsxr]

it depends on the track and the weight of my passenger. Tight short tracks I run a 16T front and anywhere from a 40-42 rear. Long tracks I run 15/46.

keep in mind I have a 13" x 8" racing slick on the rear.

Well what would you suggest for mostly highway use? I'm going to be building 2 one for daily drive. And then I have the second one that idk which way I'm going with yet. Also how many links shold I get? Thanks so much for your input.

[Kyler]

Well what would you suggest for mostly highway use? I'm going to be building 2 one for daily drive. And then I have the second one that idk which way I'm going with yet. Also how many links shold I get? Thanks so much for your input.

one of the other inmates here needs to answer that. I would start with OEM personally.

[greg78gs750]

this is the answer you are looking for.

http://www.z1enterprises.com/ShopByC...01040504010901

These guys are really helpful