M12x1.25 Flywheel Puller

[Guest]

everything I saw online said the GS750 motor used a 16mm flywheel puller so I ordered one. Well guess what, it doesn't. The bolt that I removed from the flywheel is a M12x1.25. That is a weird size.

[GregT]

everything I saw online said the GS750 motor used a 16mm flywheel puller so I ordered one. Well guess what, it doesn't. The bolt that I removed from the flywheel is a M12x1.25. That is a weird size.

Nah, very common as an alternator holding bolt. Have a look in the hole, there should be a 16mm thread in the flywheel boss which is what your puller will engage with.

[Kyler]

duh ... now that I checked, turns out it is a 14mm. the 16mm is too big. I should have put a micrometer on it to start with.

[GregT]

Well at least if you've still got a 15mm axle sitting somewhere, you can use the 14mm thread on that as a puller....