GS750 gear box into GS1000?

[Wraith]

Has anybody used/put in a GS750(2v or 4v) gear box in a GS1000 (2v) and if so was it a strate swop? Is there any differance between the two gear boxes? The reson I'm asking is I'm starting to build a GS1000 motor (Tuned) and I dont have a conplet GS1000 gear box. Cheers

[blowerbike]

not to my knowledge..
never heard of or tried such a swap.

you may pm teamdar...he has a lot of 2 valve knowledge.

[TeamDar]

The shafts from the 750 are shorter in length from bearing to bearing. I Should have GS1000 gearboxes in stock. I will check and send you a pm. Dar

[Wraith]

Has anybody used/put in a GS750(2v or 4v) gear box in a GS1000 (2v) and if so was it a strate swop? Is there any differance between the two gear boxes? The reson I'm asking is I'm starting to build a GS1000 motor (Tuned) and I dont have a conplet GS1000 gear box. Cheers

Cheers all for te replys, I can gear boxes over here but thanks for the offer.

[salty_monk]

I have one that you could have for postage.

I could have possibly got my father-in-law to transport & you could have picked up from him but he's gone home now... He'll be back later in the year.

[78gs750e]

You must swap one shaft from the 1000 to the 750 I did the swap on my 79 1000 engine

[78gs750e]

The shaft that needs to be from the 1000 is the sprocket shaft with the 750 gears swaped on. The swap should give you a quicker first three gears 4th and 5th are the same.

[Wraith]

Got a GS750 gear box (2v head type)but the gear coges seem to be the same size/number of teeth on all coges?
The shafts are a shorter lenth to the gs1000 but the coges will interchange.
The only diferance I can see is some of the gs750 coges seem to have more of a angel on the side
I think the gs750 has a bit more of a under cut box than the 1000 so would be worth using it anyway.
pic 1 gs1000 box


pic 2 gs1000


pic 3 gs750


pic 4 gs750


pic 5 both gs750 (l/h) gs1000 on the r/h


Yes I know not the best pics I will try and get some better ones LOL

[78gs750e]

The first three have different amounts of teeth which changes the ratio. It may not look like that as a assembly but that is how it is. The manual even specs the difference.

[Wraith]

The first three have different amounts of teeth which changes the ratio. It may not look like that as a assembly but that is how it is. The manual even specs the difference.

Cheers for that, it's always worth checking.

[fast eddie 52]

while we're talkin' trannies, anyone know of a 6 speed that'll interchange on a GS1100e??? That'd be awesome...