My first complete disassembly

[Fjbj40]

Valve seals, like these. http://www.ebay.com/itm/Suzuki-GS110...2a5cde&vxp=mtr

don't necessarily use theses, just a reference for you.

to seal the cases use this http://www.z1enterprises.com/ItemDet...item=TU53-0395

if you have the OEM gasket kit it should have the stem seals.....

Personally I assemble the cases, install the cylinders then install in the frame. After that I put on the head and install the clutch and all accessories. The lighter the engine during install the easier it is.

[R1reaper]

Thanks for the links and if anyone thinks of anything else. Just post it.