Announcement

Collapse
No announcement yet.

Fitment GS550 Cylinder head

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fitment GS550 Cylinder head

    Hej guys!

    I may need a new cylinderhead for my GS550 (Z) 1982.
    Will older GS550 cylinderhead's fit?

    Like this one http://www.ebay.com/itm/Suzuki-GS-55...kAAOSw8d9UuXMK

    /Rockstone

    #2
    The early style heads have smaller intake ports to go along with their VM type carbs. In the US market the split happened in 1980, not sure about your market though. Bottom line: the early head will bolt up to the bottom end, but you may have to switch out carbs, carb boots, airbox boots, etc. to do a proper install.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      I just fit a 78 GS550 head on my 82 GS550MZ, fit perfectly with same sized ports and runs on the bench ok

      Comment


        #4
        Which carburetors do you have? Which carbs does the OP in Sweden have?


        Life is too short to ride an L.

        Comment

        Working...
        X