Announcement

Collapse
No announcement yet.

GSX750ES : Crankshaft and connecting rods slide bearings measurement procedure

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GSX750ES : Crankshaft and connecting rods slide bearings measurement procedure

    I completely disassembled my crankshaft and connecting rods.
    I took all measurements needed to choose the 3 types of slide bearings.
    Please read the procedure I wrote, described in the attached pdf, and confirm my final conclusions, listed in red, at the end of every section.

    Last edited by Guest; 08-10-2016, 01:13 PM.

    #2
    Anybody ?
    Just have a look at the clearance measurement of the 2 right crankshaft pin bearing (now black).

    One is 40 micron, the other 50 micron clearance.
    Spec is 20 to 40 micron.
    Do I keep the black or upscale to brown (black + 4 microns) or upscale to yellow (black + 8 microns) ?

    Comment

    Working...
    X