Announcement

Collapse
No announcement yet.

Valve Cover Bolt Washers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Valve Cover Bolt Washers

    Hi, I have a 85 GS700 and am doing some work to the engine. I'm having trouble locating the part number for the washers on the two inside bolts of the valve cover. They are the odd ones closest to the breather cover. When I check the OEM diagrams they list the bolts but not the washers. Does that mean they come with the bolts? Any advice would be much appreciated.

    Thanks,
    Sean

    #2
    The two odd bolts (one front, one back) don't use washers since they go through a gasket. Only the 8 bolts that run down the middle require them since they don't go through a gasket.

    1980 GS1000GT (Daily rider with a 1983 1100G engine)
    1998 Honda ST1100 (Daily long distance rider)
    1982 GS850GLZ (Daily rider when the weather is crap)

    Darn, with so many daily riders it's hard to decide which one to jump on next.

    JTGS850GL aka Julius

    GS Resource Greetings

    Comment


      #3
      Ah thank you. There were two rubber and metal washers on it when I got the bike but maybe that was something a PO added.
      Originally posted by JTGS850GL View Post
      The two odd bolts (one front, one back) don't use washers since they go through a gasket. Only the 8 bolts that run down the middle require them since they don't go through a gasket.

      Comment

      Working...
      X