Thread lock SUPER 103K?

[Agemax]

Suggested by Suzuki for the press fit of 2nd gear on the countershaft on GS1000. The part number for it in the Suzuki factory manual is 99000-32035, but appears to be no longer available.
So my question is, what is the recommended bearing fit/thread lock to use as an alternative?

TIA

[Nessism]

Suggested by Suzuki for the press fit of 2nd gear on the countershaft on GS1000. The part number for it in the Suzuki factory manual is 99000-32035, but appears to be no longer available.
So my question is, what is the recommended bearing fit/thread lock to use as an alternative?

TIA

Where are you seeing that note? I see a reference to a THREAD LOCK SUPER 1363A (99104-32030) but not the number you reference.

In the Special Materials section of the manual there is also reference to various other types of thread lock: 1363C, 1332B, 1361A, 1363A. Seems a bit overkill eh?

[Nessism]

Found some info... "99104-32030 SUPERCEEDED BY 99000-32030"

[Agemax]

Where are you seeing that note?

page 7-42 in the GS1000 service manual, from Bikecliffs web site.
snap_screen_20161108163549.jpg

[fastbysuzuki]

Seems like it's used on suzuki marine engines I have not seen it for sale in the uk.

this looks like a like for like substitute https://www.bearing-king.co.uk/beari...rant-10ml/3816

[Agemax]

Seems like it's used on suzuki marine engines I have not seen it for sale in the uk.

this looks like a like for like substitute https://www.bearing-king.co.uk/beari...rant-10ml/3816

thanks, it is available to order from Suzuki dealer but at over ?18 for a bottle i was hoping there was a suitable alternative.
I still find it hard to believe that 2nd gear is only a press fit on the shaft!

[Nessism]

page 7-42 in the GS1000 service manual, from Bikecliffs web site.
[ATTACH=CONFIG]48314[/ATTACH]

That part number is different in my version of the manual. My manual states to use 99104-32030 but that has been SUPERCEEDED BY 99000-32030, which is available.