Crack in cylinder head 83 GS 1100 E

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Fancool

    #16
    Hi Ray, I'm not sure I can send you a PM?
    I checked my sent messages and it shows 0 but I sent two of them to you.
    Can you try and PM me?
    Thanks
    Marco

    Comment

    • Fancool

      #17
      I brought the head to a shop and it was tested. It is ok just some leaky seals and bad O-rings on the inside of the head.
      Already have new gasket kit so it's just a matter of putting head back on.
      I'll post end results when completed.

      Comment

      • Fancool

        #18
        022.jpgThe bike is running again and no more leaking oil from gaskets and o rings.
        Thanks for all the support as I would not have been able to do this repair with little or no problems if it was not for this site.
        Cheers!!
        Last edited by Guest; 03-23-2017, 04:03 PM.

        Comment

        • Guest

          #19
          Originally posted by azr
          Make sure you update this thread on how it's fixed, it'll help others in the future. Nice looking bike!
          +1 on the nice looking bike!

          Comment

          Working...