-
-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs..... -
Yes, it is. Contact Ray by sending a PM to ghostgs1.
That screenshot looks familiar, but you need the updated version.
Send me a PM to confirm your e-mail address, I will send it to you.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
thanks steve, I sent you an email over the weekend looking for the spreadsheet. I ended up finding one u sent me waaaaaaaay back...-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs.....Comment
-
"Waaaaaaaay back"???
It was only July, 2012.
There have been a couple minor revisions since then.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
LOL!!! wow.... time flies ...-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs.....Comment
-
I see some new shims needed in my future too
What a great resource it is & really nice to be able to custom pick the sizes instead of only the stock offerings!1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/Comment
-
I know I've seen it while lurking around, but who has the spreadsheet for the shim sizes?
Edit: NVMLast edited by Guest; 03-18-2018, 04:18 PM.Comment
-
Steve is that computer guy
See post #4 above1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SESComment
-
Leecatd got his spreadsheet (early) this morning.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Glad I saw this post. I ran across a half dozen shims in my toolbox yesterday. Since I don't have a GS anymore I'll ping ghostgs1 and see if he wants them for the club.Comment
-
I'll be in the club before the season starts
Comment
-
Nice! I'm about to pull the trigger this week and order my shims. Steve, here is the spreadsheet filled out, gosh that made it easy! (3)2.59's, (1) 2.57, (1)2.63, and (1)2.67
valves.jpg-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs.....Comment
-
If you go to Ray's profile page, you will see that he last signed in to the board a couple of weeks ago. He also has an e-mail address listed, might check that.
If worse comes to worse, you can buy the shims you need (except for the "X" shims) at Z1 Enterprises. Shop carefully, make sure they are 29.5mm shims.
Send me a copy (via e-mail) of your spreadsheet page so I can verify that you will be getting the correct shims.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Does anyone know if the Shim Club is still in operation? I need (2) 2.60 shims for my '82 1100G and am hoping to avoid the online prices.Common sense has become so uncommon that I consider it a super power.
Present Stable includes:
'74 GT750 Resto-mod I've owned since '79
'83 GS1100E (The best E I've ever enjoyed, Joe Nardy's former bike)
'82 GS1100G Resto projectComment
Comment