Cylinder Head Stuck

[ZombiePotatoSalad]

Now, for the first time, I can see the pistons... and I can honestly say I did not expect to see pistons shaped like that. I'd post a picture, but it keeps saying "upload of file failed."

[RustyTank]

Now, for the first time, I can see the pistons... and I can honestly say I did not expect to see pistons shaped like that.

You got the head off?

I'd post a picture, but it keeps saying "upload of file failed."

Are you using an image hosting website to upload the image, like IMGUR or Image Shack?

[ZombiePotatoSalad]

Let's try a video: https://vimeo.com/520397051

[RustyTank]

Let's try a video: https://vimeo.com/520397051

Well done! Always a satisfying when it finally pries off.

[RustyTank]

Let's try a video: https://vimeo.com/520397051

Well done! Always a satisfying when it finally pries off.

What method did you end up using?

[ZombiePotatoSalad]

Well done! Always a satisfying when it finally pries off.

What method did you end up using?

Penetrating oil in all the bolt holes and around the head gasket line, and a rubber mallet on the flat areas near where the carb boots go.

[RustyTank]

Penetrating oil in all the bolt holes and around the head gasket line, and a rubber mallet on the flat areas near where the carb boots go.

Which brand penetrating oil did you end up using?

[ZombiePotatoSalad]

Which brand penetrating oil did you end up using?

Seafoam Deep Creep.

[RustyTank]

Seafoam Deep Creep.

Oh yeah, that's the goods.