Announcement

Collapse
No announcement yet.

Oil consumption, time for a rebuild?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    If it is something as simple and pesky as valve stem seals I heartily recommend the Viton seals from several vendors.
    Dave
    '79 GS850GN '80 GS850GT
    Only a dog knows why a motorcyclist sticks his head out of a car window

    Comment


      #17
      Originally posted by Buffalo Bill View Post
      Get a very good, or do a very good valve job and be sure to use new valve seals, and new valves if needed.
      Not a cheap valve lap with drill…barf
      I don't mean to hijack the thread, but what's wrong with a hand or drill valve lap??? I've rebuilt several heads and used the hand or drill method without any issues. This was done on lawn mower engines and car engines, but never had an issue. Why would it be any different on a GS?
      - 1983 GS850L ~ 30,000 miles and going up - Finally ready for a proper road trip!
      - 1977 GS750B - Sold but not forgotten

      Comment

      Working...
      X