Will lowering blocks work on 1000L?

[gotjeepzj]

I was worried about clearance between the rear shock and the disc brake caliber.

[ron bayless]

i was wondering if anyone made them.if so,who?how much?

[gotjeepzj]

Aren't you making the forward controls? I would think fabing some up would be much cheaper and easier.

[ron bayless]

yes,i am making the forward controls, and absolutely ic could fab some up,but i dont even know what they look like or where they gon on the bike.once i see some i could make them over and over if anyone else is interested.

[gotjeepzj]

http://i40.photobucket.com/albums/e249/odl777/blocks4sale.jpg

There you go buddy:-D

[ron bayless]

thanks for the picture.where do they go in the suspension.

[graham harron]

4614387572 check this out on ebay it should work as long as ypur bike is a chain drive

[tracy borchert]

blocks

thanks for the picture.where do they go in the suspension.

Here's a look at mine on my 750T.8-)

[gotjeepzj]

4614387572 check this out on ebay it should work as long as ypur bike is a chain drive

Thanks for the link. I bought them. Ron i'll let you know more when I figure it out.

[gotjeepzj]

Hey tracy did you lower the front also. I'm thinking of just lowering the rear giving it a little rake in the front.

[tracy borchert]

Hey tracy did you lower the front also. I'm thinking of just lowering the rear giving it a little rake in the front.

Just a little, about 3/4" so the bike sits more level from front to back.

[courier11sec]

Here's a look at mine on my 750T.8-)

What a great looking bike!
I hope mine looks that nice one of these days.

[ron bayless]

Message To Trach Borchert

I See Your Bike, But Still Cant Tell Where The Lowering Blocks Are.are They Where The Shocks Mount At The Top Or Something?

[courier11sec]

Ron, it's down on the bottom of the shock, moving the low side rearward a bit, therefore lowering the bike. Seems to me it won't work on my bike though since the shock mounts to the diff on the left side.

[ron bayless]

oOOH.i SEE.YEP,BET IT WOULD BE HARD TO MAKE SOME THAT WOULD WORK ON CERTAIN GS BIKES.