It was the only style that fit. 8-[
-
Last edited by Guest; 10-13-2007, 11:05 AM. -
And on the seventh day,after resting from all that he had done,God went for a ride on his GS!
Upon seeing that it was good, he went out again on his ZX14! But just a little bit faster!
Comment
-
OK guys, need your opinion on paint please. I'm going with the Yoshi GS1000/GS1000S paint scheme, in a darker blue than the original. Can't decide which looks better though, white on top or solid blue on top.
Your opinions please, and yes, my Photoshop skills suck.
The SUZUKI lettering on the side will be the same dark blue as the rest of the tank.
Last edited by Guest; 11-02-2007, 09:03 PM.Comment
-
Comment
-
I like the white on top. I can't wait to see it done! When are you painting? I'm also going with blue and white on my Beast, but in more of a Skunk/1150 scheme. I'm going to use the same blue and white from my 1150.Comment
-
3rd vote for the white on top. It looks killer. By the way your photochop skills coulda fooled me. They look more like MS Paint skills to me :-DComment
-
Here's another vote for white one top.Comment
-
That'll look ace on your Beast. \\
/
Painting will begin once I can find a painter who's good but reasonably priced. Hen's teeth? I dunno. I do know I can't paint for jack (you've seen my lack of Photoshop skills already
), so I want to get this professionally done. You know any good painters in the SLC area? I bet you know them all in your neck of the woods, anyone you'd recommend?
The tank on the bike has a bit of very light rust on the inside, so first step is to treat it and coat the inside with POR15. Also on the list is to replace the fuel valve with a Pingel that just arrived. The stock valve was causing fuel starvation at 80+ MPH.
I have an old, rusted out GS1000S tank that was scored on eBay for $20 that will serve as a good paint template for the tank. The painter'll have to do the tail paint from a picture I guess.Comment
-
Very cool. The bike should look killer when all is said and done. A La Wes CooleyComment
-
yes go white on top, with suzuki down the center. see picture. Word of advise, do all tank work before you paint it, but if you have dents that need to be pulled have that done first, (they weld rods to the tank and slide hammer them) this will ruin a tank lining. Best bet is to have your painter look at the tank first. Figure out a plan of attack when it comes to body work. Get it lined then painted. Also talk to 8trackmind he can recomend a good brand of paint that might not set you back to far. Also make sure your painter does a good job around the fuel cap, they like to take short cuts there because it is covered up. Once you get it all done go buy yourself new gas tank mounting hardware from bike bandit or elese where, the new rubber and everything really makes a big differance.Last edited by first timer; 11-04-2007, 01:31 PM.78 GS1000 Yosh replica racer project, 82 Kat 1000, 10 990 ADV-R, Some dirt bikesComment
-
Definately go with the white. Instead of the people asking what you painted it with they'll be asking where you bought such a pro tank.
And yeah, brush up on the paintshop stuff man.., you got over spray on the tank mounting tab. :-DComment
-
Love the white on top.....
If there is one little tiny thing that is doing my head in every time I look at that beaut of a bike it's the height of the seat.... for some reason it looks like a tower block perched on the back...
I don't know why?????? maybe could do with some chopping out or a replacement from http://www.mandp.co.uk/productInfo.aspx?catRef=520035
not very expensive but a bit of a wait....
it's the ONLY thing!!!!!
YJComment
-
Thanks for the comment YJ, cheers again for showing that putting current-spec Gixxer running gear on a GS1000 is even possible...
Your bike still looks better than mine....
.png)
The seat's fugly for sure. Well, so's the paint but that's soon to be sorted I hope.
Is that where you got your seat from, because yours looks great!
Might take the seat to a local car upholstery shop and get them to reshape it like the Yoshi GS1000 seat. \\/
Last edited by Guest; 11-11-2007, 01:03 AM.Comment
-
It might LOOK a little better but yours has better quality of engineering where the rear suspension is concerned... looks are easy to sort out..
yeah M and P are the UK equivalent of Parts Unlimited in the US and are pretty good most of the time.
Look for "seats" then "cut down seats" to get the part number... it's really well made and is fibreglass based.. very pleased with it :-D
treat yourself for Christmas....!!!!!Comment
Comment