Project GS1000ST

[chuck hahn]

Shedman..Is this the place????

http://www.zpower.com.au/catalog/index.php

[dmmccarter]

Great looking bike!

[shedman1300]

Yes thats the place, but i dont see them advertised. Might have to send them an email.

[ron bayless]

Super incredible beautiful bike.My most favoirite bike in the whole world is the blue and white wes cooley, but your red bike is superb.

[John Kat]

I think ill do the same, I have another ST as a parts bike and a SN in worse condition than this one was and all the headlight brackets are the same. Neither are full bikes.
It looks to far back to leave it.

Your bike is beautifull!
I restored mine two years ago and I confirm there are two pieces of rubber between the headlight and the fairing.
Another impossible part to get hold of is the plastic/chrome strip that comes at the end of the seat cover...
The good news is that I gave my original seat cover to TC of pitreplica who provided me with an excellent copy.
Here are some pictures.
I'd appreciate getting the address of the guy who provided you with the decals so that I can add the finishing touch to my bike.

[shedman1300]

Hey John.
http://www.bdesigns.ca is the place who did my decals.
Did a great job and the template to fit them is easy to use.
I have the rubber for the cowling but i haven't got the chrome strip for the back yet, one day.

[John Kat]

Many thanks Shedman, I had lost hope to find the ST decals...
They don't come cheap for sure!
Another trick I learned to get the ST on the road again is that you can replace the float needle only with a float needle from a GS 1000 fitted with CV carbs.
The complete float needle assy is unavailable