Post a picture of your custom GS

[dorkburger]

Agreed... looks like a bit of a bitsa, and well done - I like the colors.
82 1100e with an 83 ES fairing? The only thing that confuses me is that I though 82 frames didnt have the fairing mounts on the frame, not that a resouseful guy couldn't make it work.

Nice job.

[steve murdoch]

Nice looking bike.
How about doing a full introduction in the GS Qwners section.

IMG_20200327_134915.jpg

This my 1982

[wyly]

Thanks Steve it was hell to do, I'm sure I have invested in 16 hrs stripping and polishing it.

[steve murdoch]

I like the tank, Robert.

[wyly]

IMG_1597.jpgMy tail conversion turned out much better than I had hoped.

[wyly]

IMG_1596.jpg2nd winter's work( a four winter project) nearly completed. Need a brake line, smaller rear indicators, adjust the headers and wet sand the paint and I'm ready for summer.

Thanks! Goes like hell too

[Charlie G]

Looking nice!

Just purchased for myself a new/old Suzuki GS with special XR plugins.Screenshot_20200203-073132.jpg

Here's mine
Snapchat-799356171.jpg

[storm 64]

[ATTACH=CONFIG]58638[/ATTACH]

GS 1100 G with Hannigan fairing.
Works great.

Looks great too! Thanks for sharing 👍

F0FDD04D-6EBC-44C2-BE5E-BB1BCCA3F4F3.jpg

GS 1100 G with Hannigan fairing.
Works great.

My '83 GS650GT.

? Replica Giuliari seat for GT750
? Cut rear frame
? Mudguards of a GS650GL
? Indicators from CB400
? Rear light, origin unknown
? Lowered headlight and cluster (flip headlight bracket upside down)
? Lower handlebars
? Whole bunch of stuff getting it to run good

GS650GT.jpg

Cheers guys, quite excited to get it done and anxiously awaiting getting the on roads sorted so I can ride!

Full credit to those on here who gave me so much advice and moral support and also my local Kat community who did the same plus giving a helping hand with parts and time as well. This forum and the Katana Australia forum are both full of awesome people!

Will see how I go with a decent photo for a BOM submission, I'm not real flash with the photography side of things (haha)...