Post a picture of your custom GS

[groundshock]

A 170 tire? Damn.

Must. Have. This. Setup.

[Greg B]

Not much to look at, but it works. Used turn signals from a Ninja 750. Still large enough to be seen, but I think they really have a cleaner look. Seat was recovered by a local auto upholsterer. I had him copy the look of a Corbin. Came out really nice, comfy too.
'85 1150 (now 1229)

Bracket I made to hold Works Performance rear shock rez.

Bars from Honda NSR400. Lower than stock & I like it that way.

Adapters I made for mounting B12 calipers. Plus EBC Prolite rotors all around.

Enjoy.

[Mike_H]

Not Finished, but Close!

Here is my 82 GS650GL. This bike has a pretty well documented build here...

http://www.thegsresources.com/_forum/showthread.php?t=101452

2 years (so far) in the making.

[Billy Ricks]

Needs painting since the last round of mods.

[Guest]

it is not finished yet, but i can finally ride it!

[Guest]

[Rake]

it is not finished yet, but i can finally ride it!

Whats the front end on your bike. It almost looks like a wide glide.

[jmanz6]

Billy what year front end is that on your ES? I like that and might do that to my 700E. Did it help with the handling any? Braking? Or was it just for looks? I like it either way.

[drphilgood]

it is not finished yet, but i can finally ride it!

Sweet ride!!Can i have the tank it matches my rear fender!

[Flaggo60]

This sketch is where I've decided to head. This will be the first major reno in the 19 years I've had this 650.

[Billy Ricks]

Billy what year front end is that on your ES? I like that and might do that to my 700E. Did it help with the handling any? Braking? Or was it just for looks? I like it either way.

It's a '95 GSXR750 fork in CBR954 triples. The reason for the Honda triple is because the top triple on the 954 is stepped down bout 3/4" so you gain a little ground clearance. I used to have an '88 GSXR front end on it which improved handling and stopping power tremendously. The new front end really didn't improve handling much but I picked up ground clearance. The rotors are PFM iron rotors.

Here's how it looked with the '88 front end.

[TheRooster]

it is not finished yet, but i can finally ride it!

specs on the front end and wheels

[Guest]

Whats the front end on your bike. It almost looks like a wide glide.

lol
believe or not but the front fork is original suzuki gs 550 but i put the new massive fork holder made from aluminium. they are wider than original so i also put distance between wheels.


p.s.: my english is not so good so i often dont know do you guys know wthat i meant?

[Guest]

Sweet ride!!Can i have the tank it matches my rear fender!

of course.... if you reach to croatia for it

[drphilgood]

of course.... if you reach to croatia for it

Now that would be a reach Is that a Harley triple tree on your bike?