Cooley replica replica colours

[rudy]

Steve, you sir, are the man! I LOVE GSR!! And all the people on it! I'm down in St Kits every now and then. My brother and sister in-law, grandparents, aunt & uncle and cousins are all down there. I could be down there sometime in the next little while. No sense in letting the posties loose/break it and then take no responsibility. I'll let you know when I'll be around. Would definitely be a big help.

Rudy

[steve murdoch]

Okay, Rudy.
I have a couple cool bikes i like to show off.

[rudy]

Am I gonna have to make a special trip down to check these out? Thinking I'll need more than just a half hour.....

If I wasn't heading to T.O. to pick up another FJ, I'd come see ya saturday.

[knotzilla]

I"ve been to Steve's. He's got some great bikes, Better take some extra time viewing, Ted

[sharpy]

Details

Ok got some pics and measurements. Suzuki tank transfer is 9 1/2" (240mm) long by 1 1/2"(38mm) wide. The 3 stripes are 1/5th (5 mm) wide each as far as i can tell. But the centre red stripe is tapered. Details to follow

[sharpy]

more stuff

The little suzuki is 5 7/10" (145mm) long and 4/5 ths of a inch (21mm) wide while the "S" is 1 and 1/10th (28mm) tall and you can see how long i think.

[sharpy]

more!!!!!!

And more side cover stuff

[Guest]

Hey

Please excuse me love the paint on tail peice and fairing but where did the orange
stripes come from and why,because ive never seen this before.

[sharpy]

Please excuse me love the paint on tail peice and fairing but where did the orange
stripes come from and why,because ive never seen this before.

Maybe its just the aussie red version that has them. And while im at it the red near the fuel cap (riders side) is 108 mm and what ever that is in inches and it tapers to 75 mm at 80 mm above the welded seam near the bolt to hold the tank on

[KiwiGS]

My tank is off a 1980 GS1000S ( I think ) and has the same measurements as Sharpy's



Hey Sharpy is your tank dented or does the 1000s have indentations?
Cheers

[sharpy]

My tank is off a 1980 GS1000S ( I think ) and has the same measurements as Sharpy's



Hey Sharpy is your tank dented or does the 1000s have indentations?
Cheers

Shhh its dented from the previous owner knees. Ran into a truck and those dents and the fairing got damaged. Have a painted fairing on it and the original is stored.

[KiwiGS]

Oh....ok
I'll keep it on the down low mate
Cheers

[rudy]

Thanks guys! You've been lots of help! If that orange stripe version is really just for aussie models, I should have a very rare look this side of the pond.

I'll let you know if I have any other questions.

Rudy

[jwhelan65]

Color

Red is faster!!!!!!!

[rudy]

Red is faster!!!!!!!

So true! And pinstripes add a good 10HP as well. Dunno what all you guys are doing engine mods for, should be getting a sweet paint job!