Project Prostreet Turbo 1150 begins!!! parts bike pulled out.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 67fire

    #76
    Keep the fairing AND the center-stand!

    I LOVE that bike!

    Eric

    Comment

    • anthonygs1000

      #77
      hey ray you have to race my pro rider Ryan he is 4 years old and weighs in at 45 lbs and the bike runs 6.50s with a 175 lb rider and you have to come to new york



      ant

      Comment

      • Kris V

        #78
        Keep the fairing I kept my center stand and just not installed for weight purposes. When I need to lube the chain I just install the stand and finger tighten the bolts and when I`m done remove it. Hey Ray I`ll race ya...whats your fastest time?
        Last edited by Guest; 10-25-2009, 11:59 PM.

        Comment

        • Kris V

          #79
          Here ya go Big T this is an old Mr. Turbo kit for ya...

          Comment

          • Kris V

            #80
            Other side...

            Comment

            • rapidray
              Forum Guru
              GSResource Superstar
              • Oct 2006
              • 8195
              • So Cal

              #81
              Kris, I've gone 8.40s on our old bike in Hawaii but I am building a new motor now so don't know what it will run yet. I am guessing it will have power to go 8.60s. The motor that's in the bike now runs 9.20s but it is just a stock cams, low compression street motor. The new one will still be self starting but will be around 13.5 to 1 or so & have some bigger cams in it. The new motor is a 1445, 83.5 mm bore. Anyone that has a 1428 block & doesn't want to resleeve, I can get pistons & rings now for an 83.5 mm bore!!! YEE Haaaa! One more oversize without resleeving!!! I love the fact you used all of that blue on your bike to keep it SUZUKI!!! Ray.

              Comment

              • steve murdoch
                Forum Guru
                Past Site Supporter
                • May 2004
                • 8506
                • St. Catharines, On.

                #82
                How did you make out on the weekend of the 17th, Big_T?
                2@ \'78 GS1000

                Comment

                • Big_T112

                  #83
                  racing

                  My daughter had broken her ankle so it was a no go. plus work has picked up. May be done till next year now as most tracks are closed.

                  Comment

                  • Bad Kaw

                    #84
                    Darn man! Sorry to hear that. Hope she heals up real soon!!!
                    -KR

                    Comment

                    • Big_T112

                      #85
                      bike

                      Took it to the 1/4 mile in Steele Alabama Yesterday. Had a best run of the day at a 9.28 @ 156 mph in the 1/4 mile. I had put a lowereing strap on the front end and this helped out a bunch. Still wants to wheely bad in first and second. third too but you don't have to get out of it. If the bike just had a two stage boost controller it would be super fast. leave the line about 6 lbs then go to 20 on out a little. Or put a longer swingarm on it. I was hoping to get in the 8 sec 1/4 mile range but the first and second gear wheelys are killing my time. It was a crowd favorite though. lots of lookers and questions. Thanks, she has a cast for 6 to 8 weeks. but she is fine.

                      Comment

                      • Hitman Customs

                        #86
                        Great bike Big T....keep the fairing...Godzuki !!! look forward to seeing more of this!

                        Comment

                        Working...