Yoshimura GSX1135R (EFE) Project

[MikeG]

Dude, we're going through major withdrawal here! Need updates on the coolest bike in the boards!

[Mindless]

Haha, sorry about that. Been busy with some school work and I'm still waiting on the electrical system from the guy in England.

Took the bike over to a friend out of town the other day to get the cams timed and sorted out.



Besides that? Got the Yoshimura emblem for the muffler today so I went and got myself some rivets and fitted it. Made all the difference I think (a good contrast to all the silver on the rear end).









Started working on a chain guard for the rear sprocket as well, will post some pictures when it's done.

The new wiring harness is done, all he needs to do is check that it works and get it posted. Should be here sometime next week.

[Guest]

I don't think you're revealing everything... cos I spy some new bits added to the exhaust springs, no??

[FreshStart]

I don't think you're revealing everything... cos I spy some new bits added to the exhaust springs, no??

I see that too

[Tim Tom]

He added the springs in post 379... And both you guys commented on them

Mindless. Seriously. Words cannot describe how awesome your build is.
Also the Yosh emblem looks the business on the exhaust.

[7981GS]

I believe that they are referring to the silicone sheaths that he has since put over the springs.

Daniel

[Guest]

I believe that they are referring to the silicone sheaths that he has since put over the springs.

Daniel

Correct....

... but someone hasn't been paying attention when reading posts

[Mindless]

I believe that they are referring to the silicone sheaths that he has since put over the springs.

Daniel

Just put them on to see how it would look. They came from the Yoshimura underseat exhaust that I had mocked up early in the build. Think I'm going to remove them, don't want to clutter it with small stuff like this.

But they do serve a function though: eat small vibrations that may (in time) cause the springs to snap.

[Mindless]

Electrics all done and in the mail on the way to me. Maybe first start sometime this weekend or early next week.

[cableguy]

Those are some crazy cabinets in the back ground.

[Colin Green]

Those are some crazy cabinets in the back ground.

Yup! My guess is that some mad Dutchman made them

[Mindless]

All I know is that a British guy made the electrics.

[Mindless]

Got the new loom today so I've pretty much spent the whole day sorting it out and getting everything fitted where I want it.

Front of the loom pretty much all sorted out. Just need to wire the Dyna2000 to the coils.



Fitted the alarm siren / horn on the side of the headstock. Somehow, it just made sense there.



Then I hid the remote ignition / alarm unit under a plate which I had riveted to the frame.



And with the tank on it looks like this...





Tomorrow I'll be sorting out the rest as well as the Dyna2000 and test everything to see if it works. Wish me luck.

[7981GS]

That wiring looks way too messy.
Is there any way that you could neaten it up a bit?

Daniel

[midnightcafe]

wait is this beast going to be street legal??