Thanks
Announcement
Collapse
No announcement yet.
GS gauge restoration
Collapse
X
-
gs750meagain
GS gauge restoration
Hey there, first post on the site. I'm trying to find someone who restores gauge housings(for my 78 GS750) to there origional luster. The gauges tend to fade over the years and the white trim in the middle as well as white lettering tends to ware off. Since that's what I'm looking at when on the bike, I'd like it to be perfect. Any help would be appreciated. I've searched the internet looking for anyone but no luck.
ThanksTags: None
-
You can bring back the black shine easily enough with silicon spray - 'Back to Black' 'Cockpit Shine' etc - all available at car accessory shops. Easy to do, just takes a bit of elbow grease. For the white lettering it's a case of a magnifying glass, a tiny paint brush and a steady hand.79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my father
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35302
- Torrance, CA
I've never tried this but one guy here refilled the white lettering on his gauges by wiping the gauge faces with white paint and then skimming off the excess. Using acrylic paint might be a good idea here since it won't bit into the plastic - and make removing the extra difficult.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
gs750meagain
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35302
- Torrance, CA
Another thing, you can get inside the gauge by carefully prying the lip on the front bezel until the bezel pulls free. The face plate on the gauge can be changed and there was even a guy here that was making custom gauge overlays (do a search for more info).Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Woodsy
I'll be getting a signwriter to make me up a new gauge face by supplying him the old gauges to go from.
Comment
Comment