Announcement

Collapse
No announcement yet.

Rusty everything...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Rusty everything...

    So I got a running gs. Added to the minor issues of sitting for a few years this thing has rust almost everywhere. What are some tricks to remove it, and when Is it time to call a part dead.

    Oddly places like inside of the gas tank are free of rust.

    #2
    Of course it depends on the part and the severity of the rust.
    Some Autosol polish, 0000 steel wool and elbow grease will clean up a lot of the small rust blemishes. Bigger parts like exhausts might need to be blasted and painted/coated instead.
    2@ \'78 GS1000

    Comment


      #3
      steel wool will put scratches in chrome etc, you could soak some stuff in vinegar for a couple days.

      also if its light rust you could just use a shop rag with wd 40 and it will take it off without scratching anything, i did this on my rear shock shafts that had surface rust and it worked perfect.

      and when a part is dead is when it doesnt work anymore.

      Comment


        #4
        I was turn on to a liquid called Krust Kudder for rust. It works very well. You can get it at Home Depot. Soak parts in it however, Only comes in a small bottle ( 8 or 12 ounce I think) so makes it kinda pricey.

        Evapo Rust also works.
        1979 GS850G
        2004 SV650N track bike
        2005 TT-R125 pit bike
        LRRS #246 / Northeast Cycles / Woodcraft / Armour Bodies / Hindle Exhaust / Central Mass Powersport

        http://s327.photobucket.com/albums/k443/tas850g/

        Comment


          #5
          Evaop Rust is the real deal. Harbor Freight sell it.

          If on the cheap get some deck wash product with oxalic acid in it and mix up a weak batch. This stuff will eat rust off chrome without damaging paint or chrome. Works great.
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment


            #6
            +1 on Evapo-rust and wood bleach. terrylee

            Comment

            Working...
            X