Aftermarket Horn
Collapse
X
-
Tags: None
-
850GT_Rider
I mounted up a pair of the Fiamm Freeway Blasters.
Most aftermarket horns that are louder than the stock ones (in other words ALL of them) will draw more current. Recommend putting in a relay - existing horn switch powers the relay, the horn current comes direct from the fuse block.
One source (there are many): http://www.amazon.com/FIAMM-72112-Fr.../dp/B000DINKPQ
Relay Mod is here: http://members.dslextreme.com/users/...stall_gert.pdf -
spyug
+1 on the Fiamms. One of the first mods I make on new to me bikes as they've saved me being merged into a couple of times now. they come in a High and a Low tone models so mount one of each. They are not overly expensive at between $10 (on sale) to $20 but if price is an issue even mounting just a high tone makes a big difference over stock.Last edited by Guest; 11-12-2013, 04:24 PM.Comment
-
Griffyn
I did this with the headlights on some of my cars and it made for a visible difference in brightness, it's one of the things I plan to do on the GS once I get all her missing/damaged bits replaced/fixed. I can definitely see how it would make sense to do it for the horn on a bike, considering the relative fragility of the electrical system.Recommend putting in a relay - existing horn switch powers the relay, the horn current comes direct from the fuse block.
Relay Mod is here: http://members.dslextreme.com/users/...stall_gert.pdfComment
-
snackie -
850GT_Rider
They're larger than the stock horns, so may or may not fit in exactly the same spot. I've got mine mounted on the Vetter bracket.
Each horn is a single-bolt mount, so not too tough to figure out alternative locations.Comment
-
Guest
What 850GT said, I installed that horn (high note and the relay) very loud, very good. Easy install.I mounted up a pair of the Fiamm Freeway Blasters.
Most aftermarket horns that are louder than the stock ones (in other words ALL of them) will draw more current. Recommend putting in a relay - existing horn switch powers the relay, the horn current comes direct from the fuse block.
One source (there are many): http://www.amazon.com/FIAMM-72112-Fr.../dp/B000DINKPQ
Relay Mod is here: http://members.dslextreme.com/users/...stall_gert.pdfComment
-
Dogma
--
O LORD, be gracious to me; heal me, for I have sinned against you! - David
Skeptical scrutiny is the means, in both science and religion, by which deep insights can be winnowed from deep nonsense. - Carl Sagan
--
'80 GS850 GLT
'80 GS1000 GT
'01 ZRX1200R
How to get a "What's New" feed without the Vortex, and without permanently quitting the VortexComment
-
almarconi
I'd go with the Walo Bad Boy. Use a relay to hook it up. Very loud horn.
Where in Baltimore are you located? Maybe we can go for a ride sometime.Comment



Comment