I can only speak to the VHT Universal Aluminum ( part # SP-127 ) and its not turned color, peeled, blistered or failed in any way.
-
MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it. -
Chuck, I also am looking for a paint that is also fuel and chemical resistant as well. Going to try and pickup a can of the SP-127 so that I can spray a part with it to see how fuel resistant it is after baking for 20 minutes.Comment
-
VHT is..once its gone thru the "heat to cure" cycles as described on the can its chemical, salt, and fuel resistant. I dont think theres anything as fuel "proof" though. I can take pics and email you the label to read if youd like.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
Just emailed you label pics Dale.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
I love vht paints myself a quick bake of smaller parts and it becomes tough as nails. I always use it for calipers and miscelanious hardware paintingComment
-
VHT high temp paints have ceramic in them..which when baked sets up like diamonds, well pretty dang hard anyway!! Point being its extremely durable, chemical and salt resistant, and the ceramic helps to effect heat dissipation from the metals as well. Ive been very well pleased with it.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
Just painted a chunk of aluminum with VHT Engine Enamel. Two coats. Will let it air dry and then bake it.
Any suggestions for the test protocol? Keep wet with gas and see how long it lasts before any blistering?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
I threw a carb top I painted and baked with high gloss black into a dish of gas overnight and nothing happened. Fully covered.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
Lacquer thinner and brake fluid. See how long before it softens.Comment
-
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
How hot/how long do they say to bake the VHT?Comment
-
A couple hours at a low temp. I believe 200fComment
-
08rangerdan, 20 minutes at 200? F according to the label.
Ed, lacquer thinner may not be a real real world test but it will give you some sort of idea how chemical resistant it really is. Urethane holds up well to it so I would hope the VHT would offer some resistance to it as well. I would also like to know how well it does after about two weeks post cure. Other then that, maybe some harsh car wash detergent or laundry soap and a spot or two of brake fluid to see how it holds up to those.Curing Engine Enamel
VHT Engine Enamel only attains its unique properties after correct curing.
Bake at 200?F (93?C) for 20 minutes.
The inherent heat of engine operation will also accomplish curing.Comment
-
My can of VHT says 1 hour at 200F. Did that and now it's back in at 250F for some additional time. Want to make sure this stuff is as hard as possible.
I'll do a cross hatch adhesion test first then dunk one end in gas. Tomorrow I'll dunk the other end in lacquer thinner. Good fun.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Quite impossible for me to do the test when it's hovering around 10? outside. Glad that you are doing it.
Comment
Comment