Has anyone fit a harley peanut tank onto the 450? It appears that I would have to cut out 2 parts of the frame to fit it?
-
-
Why??........ -
Why to make a bobber of course; rip snorting 450 with rear frame rail chopped.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Meh, frames are over rated.Comment
-
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Don't forget the rear shocks, fender and everything behind the gas tank. That will look badddass.Comment
-
Last edited by Nessism; 07-19-2014, 08:09 AM.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
bicycle?
That 2nd pic looks like a bicycle with a motor and tank. Schwynnzuki?https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E ProjectComment
-
I kinda like that one.Comment
-
1) Hell no
2) Think very long and hard before cutting the frame in any way if you value your health and well being. If you absolutely have to have that tank it is far safer and easier to modify the tank to fit the frame than the other way around.
Tough crowd here. I like it.
Once OP is done cutting out the useful parts of the frame around the steering head it won't be able to carry any front braking loads anyway.
MarkComment
-
I had almost forgotten how much fun it is to ride a bike with a wobbly frame. Thrill a minute on a road with bumps or curves.Comment
-
Why not just mount a pair of hamster water bottles where the stock coils are mounted? No frame cutting involved and the same fuel capacity.
Comment
-
That first pic was taken just moments before that years Darwin Award was presented.Comment
-
Cowards all. Go ahead and do it, I'll watch from here.......Comment
-
when...when will the madness end? when every decent, restorable standard UJM is hacked to bits?Comment
Comment