Announcement

Collapse
No announcement yet.

shift or peg rubber

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    shift or peg rubber

    Looking for suggestions on rubber that I can use on my heel/toe shifter. The rubbers that came with my kit split open when I tried to install them. They need to be closed end and fit a 1/2" diameter rod. The only thing I have found so far are foosball handles. All suggestions appreciated.
    Last edited by jsandidge; 09-20-2014, 06:02 PM.

    1983 GS750ED-Horsetraded for the Ironhead
    1981 HD XLH

    Drew's 850 L Restoration

    Drew's 83 750E Project

    #2
    I have used fuel line. Works fine as long as it fits on tightly.

    Edited: I just noticed you said "closed end".

    Comment


      #3
      You should be able to find rubber end caps to fit various automotive emissions/AC piping which will work.
      "Thought he, it is a wicked world in all meridians; I'll die a pagan."
      ~Herman Melville

      2016 1200 Superlow
      1982 CB900f

      Comment


        #4
        Perhaps some of these will fit the bill? Plenty of options too. https://store.mocap.com/mocap_en/rvg...ameter=0.50000

        Comment

        Working...
        X