I've blasted my frame to bare metal. I sprayed it down with phosphouric prep & etch, then rinsed it with water. The whole frame immediately is covered with flash rust. Am I doing something wrong? It does come off easily with a scotchbrite, but I wasn't expecting the rust.
-
https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E Project -
Thats the way it happens. Give the parts a rub with acetone right before priming and painting..nothing to worry about with the flash over.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it. -
Thanks. After all that work with the blasting, I didn't want to have to do it over again.https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E ProjectComment
-
It happens in less than 10 minutes and its nothing in the end. Its not "eating at the frame" or gonna cause it to "rust out from under the paint". Wipe it down right as your getting ready to prime with acetone. Acetone rapidly evaporates and doesnt leave a residue behind.
Wipe it right now with your finger and it will be gone!!!!MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
A little flash rust is nothing to worry about, although I agree that it's a little disconcerting. When doing my frame I dried it as quickly as possible using towels, a leaf blower,
and a propane torch.
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Dont let it sit in an unheated garage for the next 6 months though!!! Yeah I know your on top of it...LOLMY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E ProjectComment
Comment