.png "Powered by vBulletin")
Had to replace the needle & seats, while waiting till they came from japan I put in some nitrile o rings, after 3 months they degraded & the bike started to back fire, so now putting in the proper o rings & checking the float levels.
-
-
Nessism is the guy around here. just started selling complete "O" ring kits for our carbs. Look him up and send a private message.1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100 -
Nitrile is the right material, but not all O-rings are created equal. Size is critical too; 1.6 x 7.1 works well.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
After replacing the o rings the bike was still spluttering, it must be electrical I thought, so replaced the relay I had installed, info from here, fixed, yeah, ready for summer!Comment
-
No. 3 float was a bit high, so after adjusting it the bike runs great, it was surging.Comment
Comment